Actiontec electronic GT701R - Manual (Page 41)

36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 6 Configuring Advanced Settings
The “ LAN IP Address” screen appears.
The values in the “ LAN IP Address” and “Netmask” text boxes are the IP address
and subnet mask address of the Modem as seen on the network. These values can
be modified for your
LAN network, but Actiontec recommends keeping the default
factory settings ( IP address - 192.168.0.1; subnet mask - 255.255.255.0).
☞
Note: If the Modem’s LAN IP Address is modified, verify the
DHCP Server range is within the same subnet. For more infor-
mation, see “ DHCP Server Configuration.”
After changing settings, click Apply & Reboot reboot the Modem and make all
changes permanent.
WAN IP Address
Selecting WAN IP Address in the Advanced Setup tab generates a “Warning” screen.
After reading the on-screen information, click Yes.