Setting up static ip addresses, Configuring for a single static ip address – Actiontec electronic GT701R User Manual

Page 22

Setting up
Static IP Addresses

This chapter details how to set up the Modem with a static

address. The first

section explains the configuration using a single static

address; the second sec-

tion explains the configuration using a block of static

addresses.

Configuring for a Single Static

Address

To set up the Modem to use a single static

address:

☞

Note: To complete this procedure, the Internet Service Provider

(

ISP

) worksheet or welcome letter must be available to consult.

If no worksheet has been provided, contact the

ISP

1. Open the Web browser. In the “Address” text box type:

http://192.168.0.1

then press Enter on the keyboard.

2. The Qwest Home screen appears, set to the “Status” tab. Select Advanced

Setup from the row of tabs at the top.

☞

Note: If the Qwest Home screen does not appear, make sure the

Ethernet cable is properly connected to the Modem.