8 security, Administrator password – Asus TS300-E8-PS4 User Manual
Page 116
5-34
Chapter 5: BIOS setup
4.8
Security
This menu allows a new password to be created or a current password to be cchanged. The
menu also enables or disables the Secure Boot state and lets the user configure the System
Mode state.
Set Setup Administrator
Password
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Event Logs Boot Monitor Security Tool Exit
Security
Administrator Password
User Password
Clear Password
System Boot Menu
HDD Security Configuration:
P1: HardDisk
P2: HardDisk
Administrator Password
To set an administrator password:
1.
Select the Administrator Password item and press
2.
From the Create New Password box, key in a password, then press
3.
Confirm the password when prompted.
To change an administrator password:
1.
Select the Administrator Password item and press
2.
From the Enter Current Password box, key in the current password, then press
3.
From the Create New Password box, key in a new password, then press
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator
password, but press
Password Description
If ONLY the Administrator’s password is set, then
this only limits access to Setup and is only asked
for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will have
Administrator rights.
The password length must be
in the following range:
Minimum length
3
Maximum length
20