Night Guard Home Surveillance System C3-RS-665 - Manual (Page 21)

21
Press
Transmitter
Button
One Chirp /
LED one
pulse
Factory
Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three
pulses Four Chirps /
LED four
pulses
1
Pathway
illumination
feature “off”
Parking light turn
“on” for 30-
second upon an
unlock signal
Parking light
turn “on” for 30-
second upon an
unlock signal &
10-second
upon a lock
signal.
2
Ignition
controlled
door locks &
unlocks
Ignition controlled
door locks only
Ignition
controlled door
unlocks only
Without
ignition
controlled
door locks &
unlocks
3
0.8 second
door lock &
unlock
3.5 second door
lock & Unlock
0.8 second
Lock,
0.35 second
Unlock 0.8 sec. dbl
Lock,
0.8 sec. dbl
Unlock
Five Chirps = 0.8 second Lock, double 0.8 second Unlock
Six Chirps = Double 0.8 second Lock, 0.8 second Unlock
Seven Chirps = Door lock with “Comfort Feature”
Eight Chirps = DBI Two step unlock ( DBI ONLY )**
Nine chirps = DBI Unlock ALL doors ( DBI Only )**
**Select either of these options when using Autopage Two Way
Data Bus Interface Only. For use with ADS CI3 Compatible data
modules and/or CI3 Telematics Module.
4
H2/4 Brown
Wire = (+)
Constant
Siren output
H2/4 Brown Wire
= (+) Pulsing
Output
(Relay Required
for [-] Horn)
5 +
3 Hours
Timer Start 2 Hours Timer
Start
6 +
The Vehicle
without
Turbo
(The system
Cannot be
armed with
the engine
running)
The Vehicle with Turbo (The system Can be Armed with
the engine running)
The shock sensor
will be by-passed
upon engine
running.
(The engine will
run by itself after
the ignition is
turned off) The shock
sensor by -pass
3minutes after
armed.
(The engine will
run by itself
after the ignition
is turned off)
Press and
buttons at
the same time
to control
Engine run
time for 1
minute and
the shock
sensor will be
by-passed
upon engine
running.
Five chirps = Press and buttons at the same
time to control Engine run time for 3 minutes and the
shock sensor will be by-pass upon engine running.
Six chirps = Press and buttons at the same
time to control Engine run time for 5 minutes and the
shock sensor will be by-passed upon engine running.
7 +
2nd Channel
Pulsed 2nd Channel
Momentary