Night Guard Home Surveillance System C3-RS-665 User Manual
Page 20
20
4
All Confirmation
chirps on
Siren
Confirmation
chirp on only
Horn
Confirmation
chirp on only
All
Confirmation
chirps off
5
+
Lock/Arm &
Unlock/Disarm
Confirmation
Chirps
Lock/Arm
Confirmation
Chirp Only
6
+
H7/13 White wire=
Dome Light Output
H7/13 White
wire= Horn
Output
H7/13 White
wire= Factory
Security Rearm
Signal
H7/13 White
wire= 3rd
Channel
Momentary
(5 chirps)
3rd channel
Latched
7
+
With Dome light
turns on after
ignition off (45
second door
by-pass)
With Dome light
turns ON after
ignition on & off
(45 second door
by-pass)
Without this
feature
*
If passive arming is selected, the auto rearm feature will be active
Exit: Turn Ignition to ‘ON’ position, or leave it for 15 seconds.
Three long chirps & Three parking light flashes will confirm exit.
FEATURE “B” PROGRAMMING:
1
Turn the Ignition ‘switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2
Push the Valet switch 5 times (holding in on the 5th push) until two
chirps with a long chirp is heard then release the valet switch. You are
now in the Alarm feature ‘B’ programming mode.
Press and release the transmitter button corresponding to the feature
you want to program.
(See next page for table)