Canon PowerShot A3500 IS - Manual (Page 95)

95
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 3. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 4 – 5 in “Adding a Computer”
( = 90 ).
• You can connect to printers that you have already connected to by choosing
them on the [Select a Device] screen in step 3.
• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the < o> button. The recent target device is listed first, so you can
easily connect again by pressing the < o>
buttons to choose it. To add
a new device, display the device selection screen by pressing the < q>
buttons, and then configure the setting. If you prefer not to display recent
target devices, press the < n> button, and on the [3] tab, choose [Wi-Fi
Settings] ► [Target History] ► [Off].
Sending Images
Send images wirelessly to destinations registered on the camera as follows.
• Images can be uploaded to social networking services or sent to email
addresses, via CANON iMAGE GATEWAY. For details, refer to the CANON
iMAGE GATEWAY website.
• Up to 50 images can be sent together at once. You can send movies together
as long as the total playback time is within two minutes. However, if the
destination is a Web service, the number of movies and images that can be
sent may be less depending on the Web service. See the desired Web service
for details.
• Depending on the condition of the network you are using, it may take a long
time to send movies. Be sure to keep an eye on the camera battery level.
• When connected to a computer, images are transferred using the computer
(software CameraWindow) instead of the camera ( = 93 ).
1 Choose [Select and send].
z z Press the < o>
buttons to
choose [Select and send], and then press
the < m> button.
COP
Y