Canon VB-C60 - Manual (Page 73)

3-5
Appen
di
x
Input/Output Terminals
External device input/output terminals and audio input/output terminals are provided at the back
of the camera.
External Device Input/Output Terminals
Two external device input terminals and two external device output terminals are available.
You can check the status of external device inputs and operate the external device outputs using
VB-C60 Viewer or RM-Lite Viewer. See "Operating the External Device Outputs" and "Displaying
the External Device Input Status" ( Operation Guide).
External Device Input Terminals (IN1, IN2)
There are two sets of external device input terminals (IN1, IN2), where each set consists of two
terminals. The - terminals are connected to the GND in the camera. Two-wire cables are
connected to the + and - terminals to achieve electrical continuity or insulation between the two
terminals for notification to the viewer.
Note
For the sensors and switches to be connected, connect terminals that are electrically
isolated from each power supply or GND.
Do not push the external device input/output terminal buttons too strongly. The buttons may
remain pushed-in.
Audio input
terminal
Audio output
terminal
External device input
terminals
External device
output terminals