Canon VB-C60 - Manual (Page 64)

2-22
Step 4 Install the Camera
2. Determine the installation position of the camera.
Apply the bundled template onto the dome to determine the hole positions for backside
ceiling bracket and in-ceiling bracket, and mark the positions using a pencil, etc.
3. Open in the ceiling the holes (3 locations) for installing the backside ceiling bracket, as well as
a hole for in-ceiling bracket.
4. Install the backside ceiling bracket in the ceiling.
Access from inside the ceiling and insert the projections of the backside ceiling bracket into
the holes opened in step 3.
Note
After the holes have been opened, be careful not to let shavings, etc., enter the dome when
the indoor dome housing is installed.
Tip
It is recommended that the backside ceiling bracket be temporarily secured with double-
sided adhesive tape, etc., so that the backside ceiling bracket will not separate when the
dome is secured later on.
ø7.0mm
Height
10.0mm
Template bundled with the dome
Camera direction
Backside ceiling bracket