Canon VB-C60 - Manual (Page 56)

2-14
Step 3 Perform Initial Setting of the Camera
3. The viewer starts and video captured by the camera is displayed.
This completes the video check process.
Note
Clicking [Setting Page] or [Admin Viewer] on the top page of the camera displays each
user authentication window.
The factory setting user name and password are as follows:
User name: root Password: VB-C60
Authentication Window Accessed via Setting Page Authentication Window Accessed via Admin Viewer
Be sure to change the administrator password for security reasons. See "Administrator
Password" ( Operation Guide).
To display both JPEG and MPEG-4 video, install and use RM-Lite Viewer ( P. 1-8).
Where video can be transmitted to is not limited by the factory settings, etc. To use the
camera for surveillance purposes, etc., be sure to set the [Access Control] options on the
Setting Page. See "Setting User Access Privileges (Access Control)" ( Operation Guide).
Tip
For information on how to use VB-C60 Viewer, see Operation Guide.
When [Setting Page] is clicked, various options can be set. See "Accessing the Setting
Menu" ( Operation Guide).