Canon PowerShot A2600 - Manual (Page 63)

63
ç Contents ç Chapter Contents
Still Images/Movies
• If the camera is turned on while the < p> button is held
down, the camera will no longer sound. To activate sounds
again, press the < n> button and choose [Mute]
on the [ 3] tab, and then press the buttons to
choose [Off].
A1400
• To activate the screen when the camera is on but the
screen is blank, press the < p> button.
Still Images
• A flashing [ ] icon warns that images are more likely
to be blurred by camera shake. In this case, mount the
camera on a tripod or take other measures to keep it still.
• If your shots are dark despite the flash firing, move closer
to the subject. For details on the flash range, see “Flash
Range” ( = 219 ).
• The subject may be too close if the camera only beeps
once when you press the shutter button halfway. For
details on the focusing range (shooting range), see
“Shooting Range” ( = 219 ).
• To reduce red-eye and to assist in focusing, the lamp may
be activated when shooting in low-light conditions.