Canon PowerShot A2600 - Manual (Page 121)

121
ç Contents ç Chapter Contents
Changing the Screen Displayed After Shots
1 Set [Display Time] to
[2 sec.], [4 sec.], [8 sec.],
or [Hold] ( = 120 ).
2
Configure the setting.
z z Press the < o>
buttons to
choose [Display Info]. Press the
< q> buttons to choose the
desired option.
z z To restore the original setting,
repeat this process but choose
[Off].
Off Displays only the image.
Detailed Displays shooting details ( = 201 ).
• When [Display Time] is set to [Off] or [Quick] ( = 120 ), [Display
Info] is set to [Off] and cannot be changed.
• By pressing the < l> button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] on the [ 4] tab cannot be changed. By
pressing the < m> button, you can do the following operations.
- Protection ( = 132 )