Canon EOS Rebel SL1 18-55mm IS STM Lens Kit - Manual (Page 35)

35
If you turn on the power switch and the date/time/zone setting
screen appears, see page 37 to set the date/time/zone.
: The camera turns on. You can
shoot movies (p.181).
<1> : The camera turns on. You can
shoot still photos.
<2> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
Whenever you set the power switch to <1> or <2>, sensor
cleaning will be executed automatically. (A small sound may be
heard.) During the sensor cleaning, the LCD monitor will display
.
You can still shoot during sensor cleaning by pressing the shutter
button halfway (p.43) to stop the sensor cleaning and take a picture.
If you repeatedly turn the power switch <1>/<2> at a short
interval, the icon may not be displayed. This is normal and
not a malfunction.
To save battery power, the camera turns off automatically after
approx. 30 seconds of non-operation. To turn on the camera again,
just press the shutter button halfway (p.43).
You can set the auto power off time with [52: Auto power off]
(p.217).
Turning on the Power
Automatic Sensor Cleaning
3 Auto Power Off
If you set the power switch to <2> while an image is being recorded to
the card, [Recording...] will be displayed and the power will turn off after the
card finishes recording the image.
COP
Y