Canon PowerShot G15 - Manual (Page 283)

283
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way ( = 19).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position ( = 18).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way ( = 19).
Memory card error (= 224)
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
( = 19).
Insufficient space on card
• There is not enough free space on the memory card to shoot ( = 53, 93, 123,
161) or edit images ( = 206 – 211). Either erase unneeded images (= 196, 197)
or insert a memory card with enough free space ( = 18).
Charge the battery (= 17)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (= 192)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot register this image!/
Cannot modify/Cannot assign to category/Unselectable image./No
identification information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* ( = 189), Smart Shuffle* (= 191), Categorize (= 203), Rotate
( = 200), Edit* (= 206 – 211), Assign as Start-up Image* (= 222), Print List*
( = 266), Photobook Set-up* (= 271), and Edit ID Info* (= 187 – 188).
• Grouped images cannot be processed ( = 117).