Canon PowerShot G15 - Manual (Page 253)

253
Using Optional Accessories
z z Align the ○ mark on the ring with the ●
mark on the camera, and then lift the
ring off.
3
Attach the back section of the
conversion lens adapter.
z z Align the ● mark on the back section with
the ● mark on the camera, and then turn
the adapter in the direction of the arrows
until it locks in place.
z z To remove the adapter, hold down the
ring release button and turn the adapter
in the opposite direction.
4
Attach the controller to the
camera.
z z Attach the control component of the
macro ring lite to the hot shoe on top of
the camera.
5
Attach the flash unit to the
conversion lens adapter.
z z Press the release buttons on both sides
of the macro ring lite in and attach the
macro ring lite to the conversion lens
adapter.
6
Choose shooting mode <G>,
<M>, <B>, or <D>.
z z Flash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.