Canon PowerShot G15 - Manual (Page 115)

115
Special Modes for Other Purposes
3
Press the shutter button all the
way down.
X X The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
X X The lamp blinks and the self-timer sound
is played.
4
Join the subjects in the
shooting area and look at the
camera.
X X After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
z z To cancel shooting after you have
triggered the self-timer, press the
< n> button.
• Even if your face is not detected after you join the others in the shooting
area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the < o>
buttons after choosing
[ ] in step 1. [Blink Detection] ( = 88) is only available for the final shot.
COP
Y