Canon EOS C100 - Manual (Page 150)

Troubleshooting
150
*A/*B Recording was stopped.
- The file control information is corrupted or there was an encoder error. Turn off the camcorder and back on again.
Then, remove the SD card being used and reinsert it. Alternatively, replace the SD card. If this does not solve the
problem, consult a Canon Service Center.
• Corrupted file control information cannot be recovered. SD cards or clips with corrupt file control information cannot
be read by the supplied software, Data Import Utility.
*A J*B / *BJ*A Switched
- This message appears when you use the SLOT SELECT button to switch the SD card slot in use or recording
continued from one SD card to the other.
*A J*B / *BJ*A Will switch in a moment
- The SD card is almost full so recording will continue on the other SD card in approximately 1 minute.
COP
Y