Canon XF305 - Manual (Page 164)

Photos
164
7
Photo Operations
Protecting a Photo from the Index Screen
1 Open the [Photos] Index Screen
• Refer to Viewing Photos (0 161).
2 Move the orange selection frame to the photo to be protected.
3 Press SET to open the photo menu.
4 Select [Protect] and then press SET.
• To remove protection settings from a protected photo, select
[Unprotect] instead.
• The screen prompts you to confirm the operation.
5 Select [OK] and then press SET.
• The selected photo is protected and h appears next to the photo’s
thumbnail.
• Select [Cancel] instead to cancel the operation.
• If a custom picture file is embedded in the photo, it is also protected.
IMPORTANT
• Initializing an SD card will permanently erase all the data it contains,
including protected photos and custom picture files.
Copying Custom Picture Files
You can copy to the camcorder a custom picture file embedded in a
photo. Custom picture files can be copied from the photo playback
screen or [Photos] index screen.
Copying a File from the Playback Screen
1 Display the photo with the custom picture file to be copied.
• Refer to Viewing Photos (0 161).
2 Press SET to open the photo menu.
3 Select [Copy X File] and then press SET.
• The [X Data 1/3] screen appears with the orange selection frame
indicating the first file slot in the camcorder.
• Alternatively, you can press the CUSTOM PICT. button.
• You can push the joystick up/down or turn the SELECT dial to
display the [X Data 2/3] and [X Data 3/3] screens.
4 Select the desired file slot in the camcorder and then press SET.
5 Select [OK] and then press SET.
• The custom picture file embedded in the selected photo is copied,
overwriting the file in that slot.
6 When the confirmation message appears, press SET.
Operating modes:
COP
Y