Canon EOS C500 PL - Manual (Page 15)

15
1
Select [Automatic] or [Manual] and then
press SET.
If you selected [Automatic], IP settings will be
assigned automatically. Continue with the
procedure to review and save the configuration
(A 16).
2
Enter the network’s TCP/IP settings
manually.
Enter the IP address assigned to the camcorder,
and the network’s subnet mask, and default
gateway.
Push the joystick up/down or turn the SELECT dial
to select a value for the first field and press SET to
move to the next field. After completing the four
fields of an address, select [Set] and press SET to
enter the address.
For details about the network’s settings, consult
the network administrator.
After entering the default gateway’s address,
continue with the procedure to review and save
the configuration (A 16).
Configuring Network (TCP/IP) Settings
COP
Y