Canon EOS-1D C - Manual (Page 43)

43
Canon Log gamma is gamma correction for post-production. It is
geared to maximize the image sensor’s characteristics and attain a
wide dynamic range. It minimizes loss of shadow and highlight details,
and tonal information from the shadows to highlights can be
incorporated in the movie.
A movie shot with Canon Log gamma can be applied with a lookup
table (LUT) during post-production. Download the LUT data from the
Canon website.
1
Select [Canon Log settings].
Under the [z5] tab, select [Canon
Log settings], then press <0>.
2
Select [Canon Log].
Press <0>.
3
Select [On].
Turn the <5> dial to select [On],
then press <0>.
X Canon Log gamma will be set.
Setting the Canon Log Gamma
If [Canon Log] is [On] for movie shooting, the following restrictions will apply:
• The shooting mode will be set automatically to (Manual exposure).
(Shooting is not possible in the d/BULB, s, and f modes.)
• AF is not possible. Focus manually.
• ISO Auto will not work. Set the ISO speed manually.
(ISO speed is set to ISO 400 when ISO Auto is set.)