Canon EOS-1D C - Manual (Page 39)

39
You can shoot movies while recording
sound with the built-in monaural
microphone, with a commercially-
available stereo microphone, or with Line
input. You can also freely adjust the
sound-recording level.
Set the sound recording with [z4:
Sound recording].
[Auto] : The sound-recording level is adjusted automatically. Auto
level control will operate automatically in response to the
sound level.
[Manual] : You can adjust the sound-recording level to one of 64
levels. Select [Rec. level] and look at the level meter
while turning the <5> dial to adjust the sound-recording
level. While looking at the peak hold indicator (approx. 3
sec.), adjust so that the level meter sometimes lights up
the “12” (-12 dB) mark on the right for the loudest sounds.
If it exceeds “0”, the sound will be distorted.
[Line input]: You can input sound through Line input. The sound is
then recorded together with the movie. You can adjust the
sound-recording level to one of 64 levels. The adjustment
procedure is the same as with [Manual].
[Disable] : Sound will not be recorded.
When set to [Enable], it reduces wind noise when there is wind
outdoors. This feature takes effect only with the built-in microphone.
Note that [Enable] will also reduce low bass sounds, so set this function
to [Disable] when there is no wind. It will record a more natural sound
than with [Enable].
3 Setting the Sound Recording
Sound Recording/Sound-Recording Level
Wind Filter