Brother DCP-350C - Manual (Page 51)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
37
5
Photo Effects
5
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing Ink. To
go back to the original size, press Ink
again.
• The Photo Effects feature is supported by
technology from Reallusion, Inc.
Auto Correct
5
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b
Press a or b to choose Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Auto Correct.
Press OK.
e
Press + or - repeatedly to enter the
number of copies you want.
Press OK.
f
Do one of the following.
„ Press OK and change the print
settings. (See page 42.)
„ If you do not want to change any
settings, press Color Start to print.
Note
If Remove Red-Eye appears on the LCD,
press a to remove red-eye from your photo.
Enhance Skin - Tone
5
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
color in your photos and adjusts the image.
a
Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b
Press a or b to choose
Photo Effects
.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Skin-Tone
.
Press OK.
e
Do one of the following.
„ Press OK if you do not want to
change any settings.
„ Press a or b to adjust the effect level
manually. Press OK when you have
finished.
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following.
„ Press OK and change the print
settings. (See page 42.)
„ If you do not want to change any
settings, press Color Start to print.