Brother DCP-130C - Manual (Page 78)

Troubleshooting and Routine Maintenance
65
Checking the printing
alignment
B
You may need to adjust the printing
alignment. However, if after transporting the
machine your printed text becomes blurred or
images become faded then adjustments may
need to be made.
a
Press Ink.
b
Press a or b to choose Test Print.
Press OK.
c
Press a or b to choose Alignment.
Press OK.
d
Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
Is Alignment OK?
aYes bNo
e
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
„ If the number 5 sample of both the
600 dpi and 1200 dpi are the best
matches, press a (Yes) to finish
Alignment Check, and go to step h.
„ If another test print number is a
better match for either 600 dpi or
1200 dpi, press b (No) to choose it.
f
For 600 dpi, press a or b to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
600dpi Adjust
Select Best #5
Press OK.
g
For 1200 dpi, press a or b to choose
the number of the test print that most
closely matches the number 0 sample
(1-8).
1200dpi Adjust
Select Best #5
Press OK.
h
Press Stop/Exit.
Checking the ink volume
B
You can check the ink that is left in the
cartridge.
a
Press Ink.
b
Press a or b to choose Ink Volume.
Press OK.
c
Press a or b to choose the color you
want to check.
The LCD shows the ink volume.
Bk:- nnonn+ e
d
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh
®
in the
Software User's Guide on the CD-ROM.)