Brother DCP-130C - Manual (Page 20)

General Information
7
1
7 Scan
Lets you access Scan mode.
8 PhotoCapture
Lets you access PhotoCapture Center
®
mode.
9 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
10 Warning LED
Turns red when the LCD displays an error or an
important status message.
Warning LED indications
1
The status LED (light emitting diode) is a light
that shows the DCP status.The LCD shows
the current machine status when the machine
is idle.
LED DCP status Description
Off
Ready The DCP is ready for
use.
Red
Cover open The cover is open.
Close the cover. (See
Error messages on
page 55.)
Ink empty Replace the Ink
cartridge with a new
one. (See Replacing
the ink cartridges on
page 59.)
Paper error Put paper in the tray or
clear the paper jam.
Check the LCD
message. (See
Troubleshooting and
Routine Maintenance
on page 52.)
Others
messages Check the LCD
message. (See
Troubleshooting and
Routine Maintenance
on page 52.)