Brother MFC-7240 - Manual (Page 82)

ControlCenter4
75
4
Quick reference for scanning operation
4
This section introduces an example operation of scanning a PDF file using (File) in Advanced Mode. If
you want to change your machine’s SCAN key for Scan to PC settings using ControlCenter4, see Changing
the Scan key settings for Scan to PC menu uu page 77.
Note
The screens on your PC may vary depending on your model.
a Load your document.
b Open ControlCenter4 by clicking Start/All Programs/Brother/MFC-XXXX (where MFC-XXXX is your
model name)/ControlCenter4. The ControlCenter4 application will open.
c Choose Advanced Mode before you use ControlCenter4.
d Make sure the machine you want to use is selected from the Model pull-down list.
e Set the file type for saving to a folder. Click Configuration, and then select Button settings, Scan and
File.
The configuration dialog box appears. You can change the default settings.