Brother PE-DESIGN Ver.5 - Manual (Page 52)

44
Contents
Before Using
Getting Started
Design Center
Layout & Editing
Programmable Stitch Creator
Quick Reference
Alphabetic Index
4 Change the row offset. Under the Offset category, set the Direction as Row and set the value at
“50%”, and holding the mouse button down on either arrow or by typing the value directly in the
edit box window.
NOTE:
You can only choose to change either the row or the column offset for a given pattern. You cannot
select both for the same stitch pattern.
5 Change the direction of the pattern. Rotate the pattern to the right by clicking on the “down” arrow
until a value of
340 degrees is selected. The Sewing Attribute Setting dialog will look like this:
• For more information on the different settings of a programmable stitch, see “Sewing Attribute
Setting” on page 204.
6
Click Apply .
The stitch and its settings are set. Until they are changed again, those sewing settings, just like
any other, will be applied to every new region that you draw.
7 Finish setting the remaining sewing attributes for the ray pattern that you will create in the following
step.
Select a region color using the Region color button.
8 Select a line color and stitch using the Line color button and the Line sew type selector
. (You can also set the characteristics of the pitch in the Line sewing tab of the Sew-
ing Attribute Setting dialog.)