Brother MFC-230C - Manual (Page 62)

Chapter 8
46
b
Use the dial pad to enter the two-digit
Speed Dial number where you want to
store Group.
Press OK.
c
Use the dial pad to enter a Group
number (1 to 6).
Press OK.
Setup Group:G0_
d
To add Speed Dial numbers follow the
instructions below:
For example, for Speed Dial numbers
05 and 09. Press Speed Dial, 05,
Speed Dial, 09.
The LCD shows: #05#09.
G01:#05#09
e
Press OK when you have finished
adding numbers.
f
Use the dial pad to enter a name for the
Group.
Press OK.
Note
You can easily print a list of all your Speed
Dial numbers. Numbers that are part of a
group will be marked in the GROUP
column. (See How to print a
report on page 48.)
Dialing access codes and
credit card numbers
8
You can combine more than one Quick Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate long distance carrier.
For example, you might have stored ‘555’ on
Speed Dial #03 and ‘7000’ on Speed Dial
#02. You can use them both to dial ‘555-7000’
if you press the following keys:
Speed Dial, OK, #03, Speed Dial, #02, and
Start.
Numbers can be added manually by entering
them on the dial pad:
Speed Dial, OK, #03, 7, 0, 0, 1 (on the dial
pad), and Start.
This would dial ‘555–7001’. You can also add
a pause by pressing the Redial/Pause key.