Scan to e-mail (e-mail server), Color file type for scan to e-mail (e-mail server), Restoring the network settings to factory default – Brother MFC-9420CN User Manual
Page 34: Scan to e-mail (e-mail server) -15
Front Panel Setup
3 - 15
3
Scan to E-mail (E-mail server)
Black and White File Type for Scan to E-mail (E-mail server)
You can select the default Black and White file type for the Scan to E-mail (E-mail server) function.
1
Press Menu/Set,
6
,
7
,
1
.
2
Press
▲
or
▼
to select
or
TIFF
.
3
Press Menu/Set.
4
Press Stop/Exit.
Color File Type for Scan to E-mail (E-mail server)
You can select the default color file type for the Scan to E-mail (E-mail server) function.
1
Press Menu/Set,
6
,
7,
2
.
2
Press
▲
or
▼
to select
or
JPEG
.
3
Press Menu/Set.
4
Press Stop/Exit.
Restoring the network settings to factory default
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
1
Make sure the machine is not operating, then disconnect all the cables from the machine (except power
cable).
2
Press Menu/Set, 6, 0.
3
Press 1 to select
Reset
.
4
Press 1 to select
Yes
.
5
The machine will re-start, re-connect cables once this is complete.