Brother MFC-9420CN - Manual (Page 33)

Front Panel Setup
3 - 14
3
Setup Misc.
Ethernet
Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT
full or half duplex mode.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Half
Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset
(default is
Auto ).
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
1
Press Menu/Set, 6, 6, 1.
2
Press ▲ or ▼ to select Auto/100B-FD/100B-HD/10B-FD/10B-HD .
3
Press Menu/Set.
4
Press Stop/Exit.
Time Zone
This field displays your country time zone. The time shown is the time difference between your country and
Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is GMT-05:00.
1
Press Menu/Set, 6, 6, 2.
2
Press ▲ or ▼ to select the time.
3
Press Menu/Set to accept the selection.
4
Press Stop/Exit to exit the configuration menu.
Windows ® Time Zone Setting
You can see the time difference for your country by using the Time Zone setting in Windows ® .
1
Click on Start.
2
Select Settings / Control Panel.
3
Double click on Date/Time.
4
Select Time Zone. Change the date and time. Verify your time zone setting from the pull-down menu
(this menu displays the time difference from GMT).