Brother MFC-640CW - Manual (Page 35)

Installing the Driver & Software
33
M
a
c
int
os
h
®
Wi
re
d
Netw
o
rk
Macintosh
®
11
Turn on the machine by plugging in the power
cord.
Improper Setup
If you have setup wireless networking on your
machine before and you setup the wired
network, you should check that the machine's
Network I/F
setting is set to Wired LAN. The
wireless network interface will be inactive with
this setting.
Press Menu/Set, 5, 6, and then press a or b to
choose Wired LAN. Press Menu/Set and then
press 1 1.Yes to accept the change.
The machine will restart automatically.
12
From the Apple ® menu, click Chooser.
13
Click the Brother Ink (IP) icon, and then
choose BRN_xxxxxx (where xxxxxx are the
last six digits of the Ethernet address). Close
the Chooser.
For more information about connecting the
machine to a Macintosh
® network, see
Chapter 6 of the Network User’s Guide on the
CD-ROM.
The MFL-Pro Suite, Printer Driver and
Scanner Driver have been installed.
Note
ControlCenter2 is not supported in Mac OS
®
9.x.
14
To install Presto!
®
PageManager
®
, click the
Presto! PageManager icon and follow the
on-screen instructions.
Note
You can easily scan, share, and organize photos
and documents using Presto!
®
PageManager
®
.
Presto!
®
PageManager
®
has been
installed and the installation is now
complete.