For wired network interface users, For mac os® x 10.2.4 or greater, For mac os – Brother MFC-640CW User Manual
Page 31: X 10.2.4 or greater, Installing the driver & software, Macintosh

Installing the Driver & Software
29
M
a
c
int
os
h
®
Wi
re
d
Netw
o
rk
Macintosh
®
For Wired Network Interface Users
For Mac OS
®
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-11.
1
Unplug the machine from the AC outlet.
2
Turn on your Macintosh
®
.
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the drivers and MFL-Pro Suite. If the language
screen appears, choose your language.
5
Click MFL-Pro Suite to install.
6
Choose Wired Network Connection, and
then click Next. Follow the on-screen
instructions, and restart your Macintosh
®
.
7
After the DeviceSelector window appears,
connect the network interface cable to your
Macintosh
®
and then to the machine.
The DeviceSelector window will not appear if
you have also connected a USB interface cable
to the machine before restarting your
Macintosh
®
or if you are overwriting a
previously installed version of the Brother
Software. If you encounter this problem
continue but skip steps
software installation is completed you should
choose your Brother machine from the Model
pull-down list in the main screen of
ControlCenter2. For details, see Chapter 10 in
the Software User’s Guide on the CD-ROM.
8
Open the scanner cover to its open position.
9
Connect the network cable to the LAN socket
marked with a
symbol. You will find the
LAN socket above and to the left of the ink
cartridge slots, as shown below.