Brother MFC-640CW - Manual (Page 26)

Installing the Driver & Software
24
STEP2
M
aci
n
to
sh
®
US
B
Macintosh
®
For USB Interface Users
For Mac OS
®
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-11.
Note
For Mac OS
®
X 10.2.0 to 10.2.3 users, upgrade to
Mac OS
®
X 10.2.4 or greater. (For the latest
information for Mac OS
®
X, visit
http://solutions.brother.com)
1
Unplug the machine from the AC outlet and
from your computer, if you already connected
an interface cable.
2
Turn on your Macintosh ® .
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the drivers and MFL-Pro Suite. If the language
screen appears, choose your language.
5
Click MFL-Pro Suite to install.
6
Choose Local Connection, and then click
Next. Follow the on-screen instructions, and
restart your Macintosh
® .
7
After the DeviceSelector window appears
connect the USB interface cable to your
Macintosh and then to the machine.
The DeviceSelector window will not appear if
you have connected a USB interface cable to
the machine before restarting your Macintosh
®
or if you are overwriting a previously installed
version of the Brother Software. If you
encounter this problem continue with the
installation but skip step
13. After the software
installation is completed you should select your
Brother machine from the Model pop-up menu
in the main screen of ControlCenter2. For
details, see chapter 10 in the Software User’s
Guide on the CD-ROM.