Brother MFC-J4510DW - Manual (Page 74)

Chapter 8
68
Cropping
8
If your photo is too long or too wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
The factory setting is On. If you want to print
the whole image, change this setting to Off.
If you set Cropping to Off, also set
Borderless to Off. (See Borderless
printing on page 68.)
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Cropping.
j
Press Cropping.
k
Press Off (or On).
l
If you do not want to change additional
settings, press or OK.
Press Start to print.
Cropping: On
8
Cropping: Off
8
Borderless printing
8
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Borderless.
j
Press Borderless.
k
Press Off (or On).