Brother MFC-J4510DW - Manual (Page 38)

Chapter 4
32
Polling overview
4
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive
4
Polling receive lets you call another fax
machine to receive a fax.
Setup to receive polling
4
a
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
b
Press Options.
c
Swipe up or down, or press a or b to
display Polling RX.
d
Press Polling RX.
e
Press On (or Off).
f
Enter the fax number you are polling
using Address Book or the dial pad on
the Touchpanel.
g
Press Fax Start.
The Touchscreen shows Dialing.
Sequential polling
(Black & White only)
4
Sequential polling lets you request
documents from several fax machines in one
operation. Afterwards, a Sequential Polling
Report will be printed.
a
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and Sending Faxes.
b
Press Options.
c
Swipe up or down, or press a or b to
display Polling RX.
d
Press Polling RX.
e
Press On (or Off).
f
Press Options. Swipe up or down, or
press a or b to display Broadcasting.
g
Press Broadcasting.
h
Press Add Number.