Brother PT-9700PC - Manual (Page 13)

12
LED display
The condition of the printer can be determined by LED display on printer or USB Direct Interface (PT-
9800PCN only).
■ LED display on printer
Lamp condition
Condition Remedy
Power button
(green)
STATUS lamp
(red)
Lit Not lit Printer standby condition —
Flashing Not lit Receiving data —
Flashing Lit
During the printer receiving data
1) No tape cassette 1) Install the tape cassette and
close the tape compartment
cover.
2) Tape compartment cover is
open.
2) Close the cover.
3) Incompatible tape cassette 3) Install the correct tape cassette
and close the tape compartment
cover.
Lit Lit
During the printer standby
1) No tape cassette 1) Install the tape cassette and
close the tape compartment
cover.
2) Tape compartment cover is
open.
2) Close the cover.
3) Incompatible tape cassette 3) Install the correct tape cassette
and close the tape compartment
cover.
Lit Flashing
During printing
1) No tape cassette 1) Install the tape cassette and
close the tape compartment
cover.
2) Tape compartment cover is
open.
2) Close the cover.
3) Incorrect tape cassette 3) Install the correct tape cassette
and close the tape compartment
cover.
4) Incompatible tape cassette 4) Install the correct tape cassette
and close the tape compartment
cover.
Empty tape cassette
Install a tape cassette containing
tape and close the tape
compartment cover.
Transmission error
Press the power button on the front
of the printer.