Brother BR-Receipts - Manual (Page 18)

NOTE: When you select "Carrier Sheet Mode", the software automatically skips scanning the
header of the carrier sheet. The width of the header depends on the scanner you are using. If you
are scanning a long receipt, fold the receipt to fit to the carrier sheet with title and total amount
items shown. Do not skew the paper when folding.
NOTE: Carrier sheets may differ depending on your scanner model.
• Scan Size: The default setting is Auto Detect. Select User Defined from the
drop-down list to customize the width, height, and unit.
• Orientation: The default setting is Auto Detect. Click Settings to select other options
from the list.
• Enable Document Feeder: Select this check box if you want to use an automatic
document feeder (ADF). To use this option, the selected scanner must have an ADF
function.
• Receipt Position (ADF only): Select Left, Right, or Center from the drop-down list if
you want BR-Receipts to tell you where you have placed the receipt in the scanner’s
document feeder.
• Brightness and Contrast: Drag the sliders to adjust the contrast and brightness of the
scanned image. Threshold: When you select Black/White from the Image Type
drop-down list, the threshold slider will appear.
3. Click OK.
NOTE: The settings may differ depending on your scanner, and some features are only available
for specific scanners.
When you finish configuring your scan settings, you can start using BR-Receipts to scan receipts.
4. Put a receipt into your scanner. If you have several drivers available, click the File menu and
select Select Scanner…, and then specify a driver for your scanner from the Select Scanner
dialog box.
14