Brother VT-1000 - Manual

VT-Multi Guide
Introduction
Installing the VT-Multi driver lets you connect more
than one VT-1000 for use with audio communication
applications such as OmniJoin. You can connect up to
4 VT-1000 devices at the same time. Connecting more
than one VT-1000 offers improved audio coverage in
larger spaces and in larger group meetings.
For OmniJoin please visit
http://www.brother.com/product/webconferencing
[Note]
Please connect all VT-1000 units to individual USB 
ports on your computer. Do not connect the units to
a USB hub.
Please do not connect more than 4 VT-1000 
devices. Any additional VT-1000 devices attached
will not function, and may cause audio problems.
Please refer to the VT-1000 User’s Guide for more 
detailed operation instructions.
To avoid interference, keep a distance of 1m or 
more between each VT-1000.
Please make sure that the presentation mode 
indicator is off, otherwise audio problems can
occur.
[System Requirements]
OS Windows ® XP SP3 32bit (Installation of .NET
framework 3.5 is required)
Windows Vista ® 32/64bit
Windows ® 7 32/64bit
Windows ® 8 32/64bit
CPU Intel ® Core™ 2 Quad, Intel ® Core™ i3, Intel ®
Core™ i5, Intel ® Core™ i7
RAM 4 GB or more
HDD 100 MB of available space
Please note: Some applications and operating 
environments can interrupt audio.
Only the operating systems shown are supported. 
Installation
Window  ® 7 is shown here as an example. The
instructions may vary depending on the Windows ®
OS version.
Please make sure you are logged in with 
administrator rights.
If you have connected a VT-1000 to your computer, 
please disconnect it before the installation.
If there are any applications running, close them. 
If the  User Account Control prompt is displayed,
click Continue.
If the  Windows ® Security alert prompt is displayed,
check Always trust software from “Brother
Industries, ltd and click Install.
Download VT-Multi Driver from Brother Solutions 1.
Center at http://solutions.brother.com
Double-click the download file to start the 2.
installation process.
When the setup wizard screen appears, click 3. Next.
Follow the on-screen instructions.
After finishing the installation, restart your computer. 4.
Using VT-Multi
Please connect the VT-1000 devices to your 
computer before starting an OmniJoin meeting, or
opening your audio communication application.
Using with OmniJoin
Select the 1. Audio tab, then click Device Settings.
Select VT-Multi in 2. Playback Device and click Next,
then select VT-Multi in Recording Device, and then
click Finish to save the settings.
Please make sure that VT-Multi is selected for both
Playback Device and Recording Device.
Using with other applications
Select VT-Multi as the speaker output and 
microphone input in the audio settings of your
application.
Please refer to the documentation for your 
application for further information.