Brother HL 3070CW - Manual (Page 92)

Network printing from Windows ® basic TCP/IP Peer-to-Peer printing
82
11
Printer driver already installed
11
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a For Windows Vista
®
, Windows
®
7 and Windows Server
®
2008:
(For Windows Vista
®
) Click the button, Control Panel, Hardware and Sound, and then Printers.
(For Windows
®
7) Click the button, Devices and Printers.
(For Windows Server ® 2008) Click the Start button, Control Panel, Hardware and Sound, and then
Printers.
For Windows
® XP and Windows Server ® 2003:
Click the Start button and choose Printers and Faxes windows.
For Windows
®
2000:
Click the Start button and choose Settings and then Printers.
b
Right-click on the printer driver you wish to configure, and then choose Properties.
c Click the Ports tab and click Add Port.
d Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New
Port... button.
e The Add Standard TCP/IP Printer Port Wizard will start. Click Next.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h Close Printer Ports and Properties dialog box.
Other sources of information
11
See Configuring your machine for a network on page 10 and Configuring your machine for a wireless network
(For HL-3070CW) on page 18 to learn how to configure the IP address of the machine.