Brother MFC-885CW - Manual (Page 56)

Chapter 5
40
Setting your changes as the
new default
5
You can save the fax settings for
Fax Resolution
, Contrast,
Real Time TX
and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all settings to the
factory settings
5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose
Factory Reset
.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Sending a fax manually
5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Press (Fax).
b
Load your document.
c
To listen for a dial tone do one of the
following:
„ (MFC-685CW)Press
Speaker Phone or pick up the
handset.
„ (MFC-885CW) Press
Speaker Phone on the machine.
d
Dial the fax number.
e
When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass press
1 to send a fax.
f
Replace the handset.
Sending a fax at the end of a
conversation
5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Black Start or Color Start.
„ If you are using the scanner glass,
press 1 to send a fax.
d
Replace the handset.