Setting the fax receive stamp, Receiving a fax at the end of a conversation, Setting the print density – Brother MFC-8710DW User Manual
Page 41: 4setting the fax receive stamp
Receiving a fax
33
4
Setting the Fax Receive
Stamp
4
You can set the machine to print the received
date and time in the top center of each
received fax page.
a
Make sure you are in FAX mode
.
b
Press Menu, 2, 1, 8.
21.Setup Receive
8.Fax Rx Stamp
a
On
b
Off
Select ab or OK
c
Press a or b to choose On or Off.
Press OK.
d
Press Stop/Exit.
Note
• The received time and date will not appear
when using Internet Fax.
• Make sure you have set the current date
and time in the machine. (See Quick
Setup Guide.)
Receiving a fax at the end of a
conversation
4
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up.
a
Ask the other party to place the
document in their machine and to press
the Start or Send key.
b
When you hear the CNG tones (slowly
repeating beeps), press Start.
c
Press 2 to receive a fax.
d
Replace the external handset.
Setting the Print Density
4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a
Make sure you are in FAX mode
.
b
Press Menu, 2, 1, 6.
21.Setup Receive
6.Print Density
-nnonn+
Select d c & OK
c
Press c to make the print darker.
Or, press d to make the print lighter.
Press OK.
d
Press Stop/Exit.