Brother MFC-8710DW - Manual (Page 35)

Receiving a fax
27
4
Paging
4
When Paging is chosen, the machine dials
the cell phone or pager number you
programmed. This activates your cell phone
or pager so you will know that you have a fax
message in the machine’s memory.
a
Press Menu, 2, 5, 1.
25.Remote Fax Opt
1.Fwd/Page/Store
a PC Fax Receive
b Off
Select ab or OK
b
Press a or b to choose Paging.
Press OK.
c
Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press
1 8 0 0 5 5 5 1 2 3 4 # #.
d
Do one of the following:
 If you pager needs a PIN, enter the
PIN, press #, press Redial/Pause,
enter your fax number followed by
##. Press OK. (For example, press:
1 2 3 4 5 # Redial/Pause 1 8 0 0 5
5 5 6 7 8 9 # #)
 If you do not need a PIN, press OK.
 If you are programming a cell phone
number, press OK.
e
Press Stop/Exit.
Note
• If you have set Paging, a backup copy will
automatically be printed at the machine.
• You cannot change a pager, cell phone or
PIN number remotely.
Fax Storage
4
The Fax Storage feature lets you store your
received faxes in the machine’s memory. You
can retrieve stored fax messages from a fax
machine at another location using the remote
retrieval commands. (See Retrieving fax
messages uu page 30.) Your machine will
automatically print a copy of the stored fax.
a
Press Menu, 2, 5, 1.
25.Remote Fax Opt
1.Fwd/Page/Store
a PC Fax Receive
b Off
Select ab or OK
b
Press a or b to choose Fax Storage.
Press OK.
c
Press Stop/Exit.