Brother MFC-L8600CDW - Manual (Page 113)

Routine maintenance
101
A
Resetting the belt unit counter
A
When you replace a belt unit with a new one,
you must reset the belt unit counter by
completing the following steps:
a
Press to interrupt the error.
b
Press .
c
Press All Settings.
d
Swipe up or down, or press a or b to
display Machine Info..
e
Press Machine Info..
f
Press Parts Life.
g
Press # until the Touchscreen message
changes.
h
Press Belt Unit.
i
Press Yes.
j
Press .
Replacing the waste toner box
A
Order No. WT-320CL
The life of a waste toner box is approximately
50,000 Letter or A4 size single-sided pages.
1
1 Waste toner box life is approximate and may vary by
type of use.
WT Box End Soon
A
If the Touchscreen displays WT Box End
Soon, it means the waste toner box is near
the end of its life. Buy a new waste toner box
and have it ready before you get a Replace
WT Box message.
Replace WT Box
A
When the Replace WT Box message
appears on the Touchscreen, you must
replace the waste toner box.
Replacing the waste toner box
A
a
Make sure the machine is turned on.