Brother MW-145BT - Manual (Page 27)

Getting Started
14
Turning on/off the printer
Press and hold the power button
for a short while, until the green
or blue status LED illuminates.
→
When the printer is turned on,
the status LED is:
Green (if Bluetooth is switched off)
Blue (if Bluetooth is switched on)
„ In order to prevent this printer from accidentally being
turned on, it will not come on if the power button is
lightly pressed.
„ In order to conserve the lithium ion battery during
use, follow the operations below.
(1) Auto sleep (with Bluetooth switched on):
If there is no operation or data transmission for a
set length of time, the printer automatically enters
sleep mode. The length of time [auto sleep time]
until the printer automatically enters the sleep
mode can be specified using the Utility software.
[
→ Refer to the Software User’s Guide.]
(2) Auto power-off (with Bluetooth switched
off)
If there is no operation or data transmission for a
set length of time, the printer automatically turns
off. The length of time [auto power-off time] until
the printer automatically powers off can be speci-
fied using the Utility software. [
→ Refer to the
Software User’s Guide.]
Power button