Brother MW-145BT - Manual (Page 26)

Getting Started
13
Using Bluetooth
Using the Bluetooth
switch, select whether or
not to use Bluetooth com-
munication.
→
Slide the switch to ON to use
Bluetooth communication.
Printing can still be carried out using USB communica-
tion even if “Bluetooth communication ON” is selected
(except during the sleep mode). (
→ For details on soft-
ware, refer to the Software User's Guide.)
„ Wireless connections are used in a wide range of
fields. Therefore, in order to prevent malfunctions
with the following, Bluetooth should be turned off.
• Hospitals
• Aircraft
• Gasoline/Petrol stations
• Fire alarms
„ Bluetooth connectivity varies greatly according to its
operating environment. If a good connection cannot
be achieved, try conecting again. Connections are
difficult to achieve in the following locations.
• Near electronic equipment
• Near broadcasting stations or wireless base stations
• Near wireless LAN (IEEE 802.11)
„ Equipment using Bluetooth technology may require
a few seconds until the Bluetooth functionality can
be used after it is turned on. This length of time dif-
fers depending on the equipment. (This unit
requires a maximum of 8 seconds.)
Bluetooth
communication ON