Brother TD-4100N - Manual (Page 17)

Printing the Printer Set-up Information
12
4
NOTE
To reset the network settings and set the automatic private IP address (APIPA), follow the procedure below:
TD-4100N
• To reset network settings and turn APIPA ON
a Press the ON/OFF button to switch the machine OFF.
b Then, hold down the ON/OFF button for two seconds.
c Continue holding down the ON/OFF button, and press the Cut button 2 times.
All the network settings will be reset.
• To reset network settings and turn APIPA OFF
a Press the ON/OFF button to switch the machine OFF.
b Then, hold down the ON/OFF button for two seconds.
c
Continue holding down the ON/OFF button, and press the Cut button 4 times.
All the network settings will be reset.
TD-2120N/2130N
• To reset network settings and turn APIPA ON
a
Press and hold the (Power) button to turn the printer off.
b
Press and hold the (Feed) button and the (Power) button, until the POWER indicator lights in
orange and the STATUS indicator blinks in green.
c
While holding down the (Power) button, press the (Feed) button 2 times.
d
Release the (Power) button.
All the network settings will be reset.
• To reset network settings and turn APIPA OFF
a
Press and hold the (Power) button to turn the printer off.
b
Press and hold the (Feed) button and the (Power) button, until the POWER indicator lights in
orange and the STATUS indicator blinks in green.
c
While holding down the (Power) button, press the (Feed) button 4 times.
d
Release the (Power) button.
All the network settings will be reset.