Brother MFC 5840CN - Manual (Page 69)

A - 9 APPENDIX
NC9100h_FM6.0
Function Table and Factory Default Settings
*1: The factory setting for the ‘IP Address’ and ‘Subnet Mask’ setting may be
changed by the APIPA setting.
LEVEL
ONE
LEVEL
TWO
LEVEL THREE OPTIONS OPTIONS
FACTORY
DEFAULT
5.LAN
( 4.LAN
for MFC-
5440CN)
1.Setup
TCP/IP
1.BOOT Method Auto/ Static/ RARP/
BOOTP/ DHCP
Auto
2.IP Address [000-255].[000-255].[000-
255].[000-255]
169.254.X.X *1
3.Subnet Mask [000-255].[000-255].[000-
255].[000-255]
255.255.0.0 *1
4.Gateway [000-255].[000-255].[000-
255].[000-255]
000.000.000.000
5.Host Name BRN_XXXXXX=(last 6 fig-
ures of Ethernet address)
(up to 15 characters)
BRN_XXXXXX BRN_XXXXXX
6.WINS Config Auto/ Static Auto
7.WINS Server (Primary) 000.000.000.000 (Secondary)
000.000.000.000
000.000.000.000
8.DNS Server (Primary) 000.000.000.000 (Secondary)
000.000.000.000
000.000.000.000
9.APIPA On/Off On
2.Setup
Misc.
1.Ethernet Auto/ 100B-FD/ 100B-HD/
10B-FD/ 10B-HD
Auto
2.Time Zone GMTXXX:XX GMT-00:00
0.Factory
Reset