Brother MFC 5840CN - Manual (Page 28)

FRONT PANEL SETUP 3 - 7
NC9100h_FM6.0
Host Name
You can register the machine name on the Network. This name is
often referred to as a NetBIOS name; it will be the name that is
registered by the WINS server on your network. Brother
recommends the name BRN_XXXXXX (where XXXXXX is the last
six digits of the Ethernet address) (up to 15 characters).
1 Press Menu/Set , 5 , 1 , 5 . ( 4 , 1 , 5 for MFC-5440CN)
2 Select 1 to change. Enter the Host Name.
3 Press Menu/Set .
4 Press Stop/Exit .
WINS Config
This selection controls how the machine obtains the IP address for
the WINS server.
1 Press Menu/Set , 5 , 1 , 6 . ( 4 , 1 , 6 for MFC-5440CN)
2 Press ▲ or ▼ to select Auto or Static.
3 Press Menu/Set .
4 Press Stop/Exit .
Auto
Automatically uses a DHCP request to determine the IP addresses
for the primary and secondary WINS servers. You must set the
BOOT Method to Auto for this feature to work.
Static
Uses a specified IP address for the primary and secondary WINS
servers.