Brother MFC 5840CN - Manual (Page 40)

NETWORK PRINTING FROM WINDOWS ® (Peer to Peer) 4 - 7
NC9100h_FM6.0
7 Select the Brother LPR port (the port name you assigned in step
6 of the “Installing the Brother Peer to Peer Software” on page 4-
5) and press Next.
8 Enter any desired name for the Brother printer and press Next.
For example, you could call the printer “Networked Brother
Printer”.
9 Windows ® will now ask you if you wish to print out a test page,
select Yes and then select Finish.
You have now finished installing the Peer to Peer Print (LPR) software.
Adding a Second Brother LPR Port
You do not re-run the install program to add a new Brother LPR port.
Instead, press the Start button, select Settings, and open the
Printers window. Click on the icon of the printer that you wish to
configure, select File from the menu bar, and then choose
Properties. Click on the Details tab and push the Add Port button.
In the Add Port dialog, select the Other radio button and then
highlight Brother LPR port. Click OK and enter the port name. The
default port name is BLP1. If you have already used this name, you
will get an error message if you try to use it again, in which case use
BLP2, etc... Once you have specified the port name, click the OK
button. You will then see the Port Properties dialog.
Enter the IP address of the printer that you wish to print to and click
OK. You should now see the port that you have just created in the
Print to the following port setting of the printer driver.
Other Sources of Information
Refer to chapter 2 of this user guide to learn how to configure the IP
address of the machine.