Brother MFC J6510DW - Manual (Page 36)

36
Macintosh
Wireless Network
Install the drivers & software
(Mac OS X 10.4.11, 10.5.x, 10.6.x)
22
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
23
Install MFL-Pro Suite
a
Put the supplied installation CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon to install.
c
Choose Wireless Network Connection, and
then click Next.
d
The Brother software will search for the Brother
device in your wireless network. If the machine
is configured for your network, choose the
device you want to install, and then click Next.
Note
• For the latest drivers and information on the
Mac OS X you are using, visit
http://solutions.brother.com/.
• For Mac OS X 10.4.0 to 10.4.10 users, upgrade
to Mac OS X 10.4.11 - 10.6.x.
Note
If your wireless settings fail, the Wireless Device
Setup Wizard will appear during the installation
of MFL-Pro Suite. Confirm your settings by
following the on-screen instructions. If you
encounter this failure, go to step
20-a on page 27
and setup the wireless connection again.