2 load plain letter/a4 paper, Load plain letter/a4 paper – Brother MFC J6510DW User Manual
Page 2
2
2
Load plain Letter/A4
paper
a
Pull the paper tray (For MFC-J6710DW, paper
tray #1, the upper tray) a completely out of the
machine.
b
Open the output paper tray cover a.
c
With both hands, gently press and slide the
paper length guide a and then the paper side
guides b to fit the paper size.
Make sure that the triangular marks c on the
paper length guide a and paper side guides b
line up with the mark for the paper size you are
using.
Note
• Save all packing materials and the box in case
for any reason you must ship your machine.
• You need to purchase the correct interface
cable for the interface you want to use (for USB
or network connection).
USB cable
It is recommended to use a USB 2.0 cable (Type
A/B) that is no more than 6 feet (2 meters) long
(cable not included).
Network cable
Use a straight-through Category5 (or greater)
twisted-pair cable for 10BASE-T or 100BASE-TX
Fast Ethernet Network.
Note
• When you use Legal, A3 or Ledger size paper,
press the universal guide release button a as
you slide out the front of the paper tray (For
MFC-J6710DW, tray #1).
• When you load a different paper size in a tray,
you will need to change the paper size setting
in the machine at the same time. (See Paper
Size and Type in chapter 2 of the Basic User’s
Guide.)
1
1
1
LTR
EXE
B5
JIS
A4
B5
JIS
EXE
Photo 2L
L
4×6in
10×15cm
A4
B4
JIS
LTR
LGL
LGR
1
3
2
3