Brother MFC J6510DW - Manual (Page 27)

27
For Wireless Network Users
Wirele
ss Network
20
Choose your wireless setup method
The following instructions will offer two methods for setting up your Brother machine on a wireless network. If you
began the wireless setup from step
7 on page 8 (for Macintosh and mobile devices) go to method a (Setup
Wizard). For all other users, choose the method you prefer for your environment.
a
Manual setup from the control panel using the Setup Wizard (Macintosh, Mobile Devices and
Windows
®
)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup) or AOSS™, write
down the wireless network settings of your wireless access point/router in the area below.
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Item Record the current wireless network settings
SSID (Network Name):
Network Key
* The Network Key may also be described as the Password, Security Key or Encryption Key.
Note
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information
1) You should see the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
Now go to
page 28
b
One-push Setup using WPS or AOSS™ (Windows
®
and Macintosh)
If your wireless access point/router supports automatic wireless (one-push) setup (WPS or AOSS™)
Now go to
page 29